PYVAC hoş geldiniz!

Endüstri Haberleri

  • Basic plasma knowledge introduction

    One、What is the plasma? Plasma is the fourth state of matter except solid, liquid and gas. It is mainly dissociated by gas under the action of high electromagnetic field to form a highly active substance consisting of electrons (with negative charge), positive ions (with positive charge), free ...
    Daha fazla oku
  • What are the measuring methods of film thickness

    Generally, it can be divided into two types: in-situ measurement and off-site measurement. It is widely used in physical vapor deposition, such as microbalance, optical measurement and resistance measurement. The off-position measurement means that after the film is finished, the exercise of th...
    Daha fazla oku
  • What is physical evaporation?

    What is physical evaporation? Describe the steps in briefly as following: Physical evaporation is to heat the substance to volatilize and then deposit its vapor on a predetermined substrate. Because the evaporation source must be heated and volatilized and under condition of vacuum, it is so cal...
    Daha fazla oku
  • What are the characteristics of good films? What are the influencing factors?

    It is said that under normal conditions, its application function will not fail. To achieve this, the film must generally have strong adhesion, low internal stress, little pinhole density, strong mechanical performance, uniform film thickness, and sufficient resistance to chemical erosion. The...
    Daha fazla oku
  • Vacuum evaporation coating method

    Vacuum evaporation coating (for short, Vacuum Evaporation) refers to the method of heating evaporation coating material (metal alloy or metal oxide) at high temperature to a certain temperature under certain vacuum conditions to vaporize its atoms or molecules from the surface to form steam flo...
    Daha fazla oku
  • Common Coating Films Information

    1. TiN TiN is a common PVD coating that can increase tool hardness and have high oxidation temperature. The coating can be used in high-speed steel cutting tools or forming tools to obtain very good machining results. 2.CrN Good adhesion of CrN coating makes it the preferred coating in the proce...
    Daha fazla oku
  • Gold plating on PVD DC cylindrical target by magnetron sputtering

    The coil gold-plated target is easy and simple to manufacture. The secondary magnetic field line is obtained by tin plating on the SUS target and Ti target, and the target is produced by spraying 24 K gold on the SUS target. The biggest advantage of choosing cylinder target is limited utilization...
    Daha fazla oku
  • Working conditions and structural requirements of titanium plating coating machine

    Working condition of titanium plating coating machine:    1、Ideal operating temperature is generally 10℃-30℃.  2、The cooling water required for titanium plating equipment shall be treated with municipal water or relatively clean water except waste water;  3.   Temperature shall not exceed 25℃ w...
    Daha fazla oku
  • Introduction of Magnetron Sputtering Coating Technology

    Magnetron sputtering coating equipment is a kind of vacuum coating machine with the advantages of simple structure and good stability of electrical control. Its technology has a very important impact on the performance of the film. The process flow of magnetron sputtering coating in ceramic surfa...
    Daha fazla oku
  • Precautions of vacuum coating machine when in use

    1. Equipment grounding must be reliable and always check the electrical conductivity of the grounding device 2. The diffusion pump and the oil booster pump must be connected with the cooling water before heating, and the pump stops working, but the cooling water must not be cut off when the pump...
    Daha fazla oku
  • Metal Furniture Coatings: Vacuum Coating Machine is with a very ready market

    Metal furniture coating: vacuum coating machine is very popular in surface treatment field. At present, many consumers are looking at metal furniture painting, metal furniture with the advantages of shape unique,fashion and stylish.    Generally speaking, metal furniture in the market now is...
    Daha fazla oku
  • How to choose a suitable PVD vacuum coating machine

    When the pvd vacuum coating machine demand increases, the purchase of coating machine should be considered. The coating machine has a great influence on the processing of the whole product, however there are too many coating machine manufacturers and how to choose a suitable coating machine is ve...
    Daha fazla oku
123Sonraki> >> Page 1 / 3
WhatsApp Online Sohbet!